Clik here to view.
2019 ZX10RR head mods
Hi all, got a green light to dive into the engine & squeeze more power. As of this time the head is halfway done with porting, intake ports require some filling to remove the low spots to blend in....
View ArticleIs possible to start the engine without key?
Hi! I viewing some engine motor kits in eBay, these comes with engine, throttle bodies, wiring and Ecu. But my mechanic say that is not possible to start an engine without keys and kiss system. He say...
View ArticleGot spark, Pump primes, nada!
Hey guys, it's me again! So in a nutshell I haven't been able to get her to start since I did some work on her unrelated to fuel or spark, lol. So originally I was pretty sure that I was not getting...
View ArticleNEED HELP Absolute pressure sensor wiring
Hi all, I am in need of some help regarding the MAP sensor wiring for my bike. When I purchased the bike the previous owner had already started the bike before I arrived, disguising the extended crank...
View ArticleThrottle body mod???
Anyone with a 10r ever thought to swap the throttle bodies from the 12r or 14 to a 10? Heck the 10r uses 43mm, the 14 has 44mm, and the 12r has 46mm. The mighty gsxr1000 has 45mm. This is why the...
View ArticleClik here to view.
External oil cooler
Doing an external oil cooler conversion on my 2018 ZX10RR. The oil cooler is from an Aprilia RSV4, the hoses, brackets & fitting are for the 21+ ZX10R. Gonna have to relocate the fittings on the...
View ArticleWon't start...no fuel pump noise when ign turned on?
I have a 2006 ZX10r and rode to work this morning with no problem. When I went to start it at lunch, it would not turn over. The starter was fine and battery has plenty of juice. When I turn the...
View ArticleWhat does stock fueling usually mean with Woolich MapShares?
looking through the mapshares on Woolich’s site, there are a ton of shares that say they are tuned on stock fueling. What does that mean exactly? Is the tune optimized for just 90+ octane or what’s...
View ArticleRacing Transmissions, Adjusting Engine Braking & Slipper Clutch
My bike transmissions is on its way out. (Used on race bike).. It gets hung up in 4th and 3rd. I plan on getting the recall work done, then have the transmission sent out to get the KRT race parts put...
View ArticleLed light bulb install
Hi all, Ive installed some ledperf nano leds, i chose this option as it was a plug and play kit with no modifications. Im not sure if it is a coinsidence but i now have an esd fault and a yellow light....
View ArticleAwful brakes and Jerky Throttle.
I bought a 2020 ZX10R KRT as a second bike to compliment my high mileage (50k+ km) 2018 BMW S1000RR a few years ago. It was on sale at a great price just before the new model was released. At the time,...
View ArticleZx14r wheels to a zx10r
Does anyone know if zx14r wheels can fit on a 17' zx10r? Just curious. Have someone selling some carbon BST zx14r wheels, and just curious if they'll fit.
View Article'22 10r Aftermarket Brake Lines
I have a 22 10r KRT and have recently started to have serious rear brake issues. I have bled and replaced the fluid in the rear and the pads are in fine condition. My next logical step is to replace...
View ArticleBike not charging!!! Stator and reg are good
Wsup fellow 10Rs I have a small dilemma that is giving me quite the headache. So a couple weeks ago my bike slowly began to lose its charge and cut off a couple times In traffic until one day I was in...
View Article3/4 Exhuast vs Full System
Hello. I'm currently in the market for an exhaust for my gen 5. I've heard that these bikes can gain some bottom end with a full system compared to a 3/4. Does anyone have any experience with this...
View ArticleWanting to upgrade the camshafts with stock bottom end
The bike has 15,600 miles. I bought the bike with 15,400. While riding, I could hear a tick in the valves. I don't think it had the valves adjusted so I took it to the shop to have them adjusted. The...
View Article2016 vs 2019 velocity stacks
I have heard a lot about the performance gain when tuned on the 2016 stacks... are even better than running the 2019 stacks for 5th gens.. Does anyone have any DYNO data? How much power is gained from...
View ArticleFull Arrow Competition vs Full Akrapovic exhaust for the Gen 6?
Having a hard time deciding what system to go with. I have a few options listed below. I bought an SC Project CRT for my gen 6 10R but after talking with my dyno guy they tank the midrange and I...
View ArticleCheck engine light and oil light 2023 zx10r
Brand new zx10r has check engine light and oil light when I first bought it got it tuned and first service along with cat delete servo buddy arrow 3/4 exhaust sprint air filter. after the first service...
View ArticleWoolich autoblipper opening time
What’s everyone’s autoblipper opening times? Mines 65 all across is it safe to lower down to say 50?
View ArticleTurbo kit for newer years?
Has anyone heard of a turbo kit for a 21+ zx10r? I need ridiculous power but I'm not willing to give up cruise control 😅
View ArticleLoses throttle power for a second
Sometimes when I hit the throttle, my zx10 loses power for a second then regains it, as if it lost fuel for a second the it kicks in again, one time it throttle had no response for like 3 seconds then...
View ArticleGen 5 won’t start (no spark)
My 2020 has broken a few times under 5k miles, some user error and misc breaks. Last time a few months back was a sudden rattling. When I shut it off and tried starting it back up she had nothing. Bump...
View ArticleGen 5 Anyone who can help with Sprockets
Hello all. I own a ZX-10R KRT 2016 and i would like to change my sprockets from 17t/39t 520 setup to 16t/37t 520 setup. I have looked all over the web and i can't find any rear sprocket that could fit...
View Article2011 zx10r service manual
i have a pdf copy of the manual if anyone needs :thumbsup: send me a pm with ur email
View ArticleBest full exhaust for 2005 zx10r
so i have a 2005 zx10r and im completely upgrading it and ive been looking all across many websites and forums trying to find wht full exhaust system is the best for performance and noise. i’m looking...
View Article16 Tooth Front Sprocket
I have a stock 2008 ZX-10. I noticed when I put a 16 tooth front sprocket on, first gear was much improved for acceleration compared to the way the bike comes stock with tall first gear however when...
View ArticleEngine cuts off at high rpms
Got a 05 zx10r, had been running perfect for months, randomly one day it started to hiccup and lost power for a split second whenever I hit high rpms like 9-11k, it hiccups, engine cuts off for split...
View ArticleClik here to view.
Gen 6 headlight control module for custom bike build
Hello team green fans. Im building a bike which is kind of a hybrid between an h2 and a zx10r. Im trying to figure out what the headlight control modules function is on the gen6 zx10r. Since i've...
View ArticleSame clutch
Hi. Anyone knows if clutch its the same in gen4 and gen5? Looks identical… Thanks in advance
View ArticleWoolich Update "Disable Front Wheel Sensor"
After booting up Woolich and when it auto updates to the latest version, I've noticed a new setting that has been added for Gen V's (2016-2018) in the advanced settings menu..."Disable Front Wheel...
View ArticleGen 4 Engine Rebuild..
My ninjas, After not touching my 2011 zx10r since covid (due to a list of circumstances). I flushed fluids and got it running again. Upon starting, the motor is knocking horribly. It appears to have a...
View Article???
Is it possible to shift the motor down approximately half an inch to gain access to something without removing it?
View ArticleHelp!!
So today I was installing frame sliders on my 2015.left side went smooth took me about 15 mins. The right side how ever was a different story.i went to remove the engine bolt and it was really tight....
View ArticleKnocking/ tapping?
Hey all, I just purchased a new-to-me 2010 zx10 with 18k on the clock and am having a bit of worrisome issues with it. Long story short, it had the unfortunate and infamous clutch basket firework show...
View Article